Specialist of horizontal autoclave and ETO sterilizer manufacturing-As per FDCA / ISO 13485 / CE Norms
Ethylene Oxide (ETO) sterilizer is mainly used to sterilize medical and pharmaceutical products that cannot support conventional high temperature steam sterilization – such as devices that incompany electronic components, plastic packaging or plastic containers. Normally the ETO used for gas sterilization is mixed with diluents such as carbon dioxide or nitrogen in different proportions from 10 % ETO to 90 % ETO. The commonly used gas concentration in the sterilizers is 450 to 1000 mg/lit of chamber volume (measured as pure ETO)
Based on the latest microbiological and sterilizing principle, the Horizontal Autoclave, which we offer, is appreciated by the clients for its smooth functioning, high safety and low maintenance cost. These Horizontal Autoclaves are tested against varied quality parameters prior to delivering them to the clients. We are Ahmedabad (Gujarat) based Manufacturer, supplier and exporter of autoclave
Why Our Horizontal Autoclave?
- Economically of obtains all types of bulk sterilization which are commonly needed in Medical, Agricultural and Pharmaceutical institute
- Suitable for sterilizing hospital dressings, linen, rubber plastic goods, surgical instruments, Glassware, utensil, etc.
- Construction Robust and rugged
- The Horizontal Autoclave is based on the principle that microbiological action of saturated steam at elevated temp is rapid and thorough
- These Horizontal Autoclaves on downward displacement of air principle
- Weld construction makes it leak proof unlike riveted construction
- This device protects the heater in the generator from burning out dry.
- The steam pressure in the boiler is indicated on an individual pressure gauge.
- Safety Lock for Door Every horizontal rectangular sterilizer is fitted with SELF LOCKING SAFETY DOOR which cannot be opened when the chamber is under pressure
- By a pressure control switch which automatically limits the pressure to the required set valve.
- A dead weight safety valve at chamber level
Construction
All the sterilizers are hydraulically tested to withstand 2.5 times the working pressure Inner chamber is made of thick plate of Mild Steel of nonmagnetic stainless steel of 304/316 quality and jacket is made out of rolled steel. Sterilizers will have single door made out of rolled steel lined with S.S. sheet on both sides. The steam jacket is lined on the outer side with asbestos sheet or glass wool which prevents heat loss due to radiation and is covered by strong rolled steel sheet duly painted. Boiler made of thick stainless steel plate is suitably located under the sterilizer. High grade flanged type heating elements are fitted from front side for easy replacement/repair. The Horizontal Autoclaves come fitted with water gauge glass for water level, safety valve, water inlet and drain valves. It is also provided with Low Water Level cut off device. Two speeds of exhaust are available for evacuating. The Chamber Two separate valves are provided for evacuating air and steam from inner chamber and jacket as and when desired. A steam trap is fitted in the chamber discharge line to eliminate the condensate automatically. Switch Box consists of the Pressure control switch, Main switch, Pilot lamps, relays etc. and is mounted on the stand of the sterilizer for easy operation.
specificatin of horizontal autoclave
- double jacketed
- ss 304/ss 316 inner and outer jacket
- 100 to 5000 liter capacity
- best for pharma, food
- As per FDCA/iso 13484/ ce norms
- best price
contact us for other specification and price detail
Contact us
JAYPHARMATECH, Ahmedabad
Mail id : jaypharmatech@gmail.com
Mobile : 9099635382
Horizontal Autoclave & ETO STERILIZER INDIA 